1 Axis CNC TB6600Stepper Motor Driver Board Controller 1.5A - 4.5A



ΤΒ6600_1axis_drive_2.jpg    
Κωδικός προϊόντος: 12-0290

Βάρος: 0.085 Kg


€ 49,00


Οι τιμές δεν περιλαμβάνουν ΦΠΑ (24%)


        Διαθεσιμότητα (15-30 days)
Show shipping cost estimation
Περιγραφή
 
 Phases
 2
 Supply Voltage
 DC12V- 36V
 Current (/Output)
 0.7A-4.5A stepless adjustable function 
 Micro Stepping (/resolution)
 1, 1/2, 1/4, 1/8, 1/16
 Idle Current Reduction
 With automatic half flow function
 Input Signals
 Input pulse peak frequency up to 15 KHZ
 Protection
 Overheat/ undervoltage/ overcurrent protection
 Compatible Stepper Motors
 Nema17/Nema23/Nema34
 Compatible Softwares
 MACH3, KCAM4 etc.
 
 M1
 M2
 M3
 MOD
 OFF
 OFF
 OFF
 idle, not locked
 OFF
 OFF
 ON
 1 micro
 OFF
 ON
 OFF
 A model 1/2 micro
 OFF
 ON
 ON
 B model 1/2 micro
 ON
 OFF
 OFF
 1/4 micro
 ON
 OFF
 ON
 1/8 micro
 ON
 ON
 OFF
 1/16 micro
 ON
 ON
 ON
 idle, not locked

	
 
Pinout information:
1. POWER IN : power input interface, as shown above left negative ultra-right is positive, 
   ~50V input voltage 12.
2. STEP DRIVER PORT : B+, B -, A+, A -
3. CTR PORT : input control interface ( DIR -, DIR +, STEP -, STEP +, EN, EN + )
4. MOD SW : working mode selector switch (M1, M2, M3, LATCH) which control the driver the breakdown of the selection and error reset mode
 
DIP Switch Configurations:
LATCH ON: automatic recovery mode
LATCH OFF: manual recovery mode