3 Axis 100KHz USB Stepper Motor Driver Board 3.5A for Mach3

Κωδικός προϊόντος: 12-0435

Βάρος: 0.300 Kg

€ 120,00

Οι τιμές δεν περιλαμβάνουν ΦΠΑ (24%)

        Αμεσα Διαθέσιμο - (Ποσότητα: 4)
Show shipping cost estimation
1.Support for 3-axis linkage, you can connect three stepper motor drives or servo drives
2.Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor
3.3 general-purpose opto-couplers isolation input : can connect the limit switch, emergency stop switch, auto tool zero, home switch etc
4.Support for connecting electronic handwheel
5.Have 0-10V signal output , you can use mach3 software to control the spindle motor speed
6.4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device
7.1 status LED, indicate connection status on the board
8.Resolution 1, 1\2, 1\8, 1\16 micro stepping output
9.Three channles 3.5A adjustable output current for 2/4 phase bipolar stepper driver
10.Bulid with 4 outputs and 5 inputs
117mm x 175mm
It is manual measurement, there may be 1-3mm error.