Oscilatting Tangential Knife (OTK-3)



Oscilatting-Tangential-Knife_OTK-3.jpgOscilatting-Tangential-Knife_OTK-3_3.jpg   
Κωδικός προϊόντος: 10-0196

Βάρος: 10.000 Kg


€ 450,00


Στο παρόν προϊόν δεν ισχύει η αντικαταβολή.


Οι τιμές δεν περιλαμβάνουν ΦΠΑ (24%)


        Αμεσα Διαθέσιμο
Show shipping cost estimation
Περιγραφή
 
Use the Oscillating Tangential Knife OTK-3 to cut a variety of different materials quickly and with high-precision. For this purpose, the tool is clamped into the tool holder of the CNC gantry milling system and controlled via the CNC control software. The powerful oscillation motor quickly moves the blade up and down while the actuator rotates the blade in the respective cutting direction. This way, the tangential knife provides highly accurate results even with small contours and letterings. The solid carbide blades are available in cutting depths from 6 to 25 mm. 

The blades are not included in the scope of delivery.
To insure function, we only recommend 
Stepcraft blades for use.
 
Technical Specifications:
● Stroke power knife: 90 N with maximal stroke rate  
● Maximal stroke rate: 2.600 stroke / min 
● Oscillating mode: Grooving operation / 1.300 strokes / 2.600 strokes 
● Stroke: 3,0 mm 
● Shaft diameter tool: 6,0 mm 
● Tool interface: Weldon shaft 
● Dimensions: 98 x 52 x 160 mm 
● Clamping diameter: 43 mm 
● Weight: 1,08 kg (without knife, connection cable) 
● Housing: Aluminum 7075 anodized 
● Voltage: 30 V 
● Control electronics: 5 V
 
Typicals Materials:
● Sealing materials 
● Corrugated cardboard / Solid boards 
● Leather and cork 
● Fabrics and foils 
● Hard foamboards 
● Carpet 
● Depron
 
Scope of Delivery:
● Oscillating Tangential Knife OTK-3  
● D-Sub-15 connection cable 
● 1 g special maintenance grease
 
Manual
_________________________________________________________________________
Oscilatting Tangential Knife (OTK-3)