Tool Changer for Water or Air Cooled Spindle 0.8 or 1.5KW 65mm-New Model!
Product code: 14-0316
Weight: 0.626 Kg
Measurement: τμχ
VAT is not included (24%)
Readily available - (Quantity: 3)
Show shipping cost estimation
Weight: 0.626 Kg
Measurement: τμχ
€ 560,00
VAT is not included (24%)
Readily available - (Quantity: 3)
Show shipping cost estimation
Description
Tool changer for Water or Air cooled spindles with 65mm diam.
This spindle is suitable for the "china spindle" of 65mm outer diam and 49.5mm neck diam. The assembly is quick and very simple.
It is screwed onto the spindle shaft and attached to the spindle.
It is screwed onto the spindle shaft and attached to the spindle.
Function:
The tool sits in a SK15 tool holder (in a ER11 collet)
The SK15 Holder is held with spring force in the cone.
A pneumatic cylinder (air port 1) presses the tool holder out of the cone.
With the air port 2 the integrated "blow-out" is supplied (Air nozzle for cleaning
the cone during the tool change)
The SK15 Holder is held with spring force in the cone.
A pneumatic cylinder (air port 1) presses the tool holder out of the cone.
With the air port 2 the integrated "blow-out" is supplied (Air nozzle for cleaning
the cone during the tool change)
Specifications:
-
Aluminum case 7075, hard-anodized
-
Stainless steel spindle
-
Ball bearing
-
Concentricity of 0.01 mm
-
Weight 0.9 Kg
-
Tensile force of the spring 25 Kg
-
Uses SK15 Toolholders for ER11 Collets (1-8mm)
-
Operating pressure 8 bar
-
2 pneumatic connectors for 4mm Tubing
-
Fastening with 49.5mm mount
-
Suitable for speeds up to 28,000 rpm
-
Spindle is 55mm longer through the tool changer
-
Diameter of tool changer: 59mm
Delivery Content:
Tool changer and quick installation manual
The tool holder is not included.
To operate the tool changer you will need 2 Electro-pneumatic valves 3 / 2 to control the air
for switching and for the blow-out
To operate the tool changer you will need 2 Electro-pneumatic valves 3 / 2 to control the air
for switching and for the blow-out
|
Manuals and Instructions
|
|||
 |
|
|
|
