1 Axis Motion Programmable Controller for Servo or Stepper Motor

Κωδικός προϊόντος: 12-0293

Βάρος: 0.303 Kg

€ 79,00

Οι τιμές δεν περιλαμβάνουν ΦΠΑ (24%)

        Αμεσα Διαθέσιμο - (Ποσότητα: 1)
Show shipping cost estimation
Number of controlled axis
Single axis can achieve a variety of complex operation positioning control and non-positioning control
Maximum output frequency
Output frequency resolution
Programmable maximum number ofrows
Signal input
 6 (optical isolation)
Signal output
 3 (optical isolation)
A continuous displacement range
 -7,999,999 ~ 7,999,999
Operating state
 Autorun mode, manual operation, the program edit mode, parameter setting status
Lifting speed curve
 2 (optimization)
The number of programming instructions
 14 instruction
Display digits
 • 8 digital display
 • manual / automatic status display
 • run / stop status display
 • the number of steps / counts / procedures display
 • edit the program
 • parameter display,
 • input / output status display
 • pulse and direction display 
 Autorun feature
You can edit, you can control the start and stop automatically run through the panel buttons and processing and other operations at the terminal level
Manual operation functions
position adjustments (manual jog speed and jog the number of steps can be set)
Parameter setting function
Starting frequency, acceleration and deceleration curve, reverse clearance, manually run length, manual speed, back to zero speed and interrupt jump the line all can be set
Program editing functions
You can insert, delete, modify the program. The controller can identify the error Instruction
Return to Zero features
It can be from the positive and negative directions, automatic return to zero
Outside the operating functions
interrupt operation through parameter setting and switch connected to the terminals A and B