4 Axis 100KHz USB Motion Control Interface Board for Mach3
Product code: 12-0294
Weight: 0 Kg
Measurement: τμχ
VAT is not included (24%)
In stock (15-30 days)
Show shipping cost estimation
Weight: 0 Kg
Measurement: τμχ
€ 99,00
VAT is not included (24%)

Show shipping cost estimation
Description
• Support for 4-axis linkage, you can connect four stepper motor drives or servo drives
• Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor
• 4 general-purpose opto-couplers isolation input : can connect the limit switch, emergency stop switch, auto tool zero, home switch etc.
• Support for connecting electronic hand wheel
• Have 0-10V signal output , you can use mach3 software to control the spindle motor speed.
• 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device
• 1 status LED, indicate connection status on the board.
![]() |
![]() |
• Support for 4-axis linkage, you can connect four stepper motor drives or servo drives
• Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor
• 4 general-purpose opto-couplers isolation input : can connect the limit switch, emergency stop switch, auto tool zero, home switch etc.
• Support for connecting electronic hand wheel
• Have 0-10V signal output , you can use mach3 software to control the spindle motor speed.
• 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device
• 1 status LED, indicate connection status on the board.
![]() |
![]() |