Ελληνικά | English
    0
    Express shipping! Within 24 hours to EU countries ! 2 days to USA!

    Catalog


    CNC MACHINES
    SPECIAL PARTS-MANUFACTURING & AUTOMATION
    CNC ELECTRONICS
    CNC MECHANICS
    CNC TOOLS
    USED PARTS-SALES!
    CNC ACCESSORIES
    ASR SYSTEM
    MECHANICAL SERVICES - DIAGNOSTIC CHECKS - STUDIES
    ALUMINUM SYSTEM
    VACUUM & CLAMPING
    MATERIALS
    CNC SOFTWARE
    TUTORING
    PCs & PERIPHERALS
    TIME LAPSE PHOTOGRAPHY SYSTEM
    SCANNER-PRINTER-CUTTER-PLOTTER
    PLEXIGLASS BENDER
    FOAM CUTTERS

    1-3KHZ to 0-10V PWM signal to Voltage Digital-Analog PLC 12V - 36V

    Product code: 12-0321

    Weight: 0.019 Kg
    Measurement: τμχ


    € 38,70


    VAT is not included (24%)


        
       Readily available - (Quantity: 4)
    Show shipping cost estimation
    Description
     
    • Input: DC 12~30V
    • Input current: no less than 100mA.
    • Note:After power-up, when there is no input signal, the output is 0V. There is output only when there is input.
    • Function:PWM converts digital signals into analog signal ( 0 to 10V). Can be used for industrial control panel PLC or other signal interface switching.
    • Use:PWM signal input frequency range: 1KHZ-3KHZ.
    • PWM signal input level range: 4.5V to 10V peak to peak level, jumper inserted at 5V. This type signal mainly for conventional industrial control card (such as MACH3 board), for 5V the CPU interface.
    • 12 to 24V peak to peak level, jumper inserted at 24V. This type signal mainly for conventional PLC interface
       

    0-10V analog output details:

    When the signal input port is not connected, the output port gives 10V. The first time when we power on this module, we better calibrate it: find a 50% duty ratio signal, connect to DIN-, DIN+, the amplitude matches corresponding jumper. When frequency is at 1kHz ~ 3kHz, use a multi-meter to test AO, GND. The meter should be showing around 5V. We adjust the potentiometer on the converter module to make multi-meter shows 5V sharp. After this is done, we have calibrated and matched pulse signal with this converter module. The module has a definition of 0.1V. Output current 10mA. If duty ratio is in opposite to voltage, we can select or un-select PWM output pin STEP LOW / ACTIVE in MACH3 software.

    • Power Input Range: 12V-30V (Power requirements: more than 100MA
    • Definitions about markings onboard
    • DIN+: PWM signal input positive terminal. (When common negative connection, this port connects to PWM Signal. When common positive connection, this port connects to 5V or 24V)
    • DIN-: PWM signal input negative terminal. (When common negative connection, this port connects to GND of signal. When common positive connection, this port connects to PWM signal)
    • 12-30V: power input positive terminal
    • GND: power supply ground
    • AO: Analog 0-10V output port
    • GND: signal ground. It is through to GND of power input.


    Other Features:

    1 power supply with anti-false-connection protection
    2 with power indicator LED onboard
    3 by adjusting potentiometer board, can match the calibration of different frequency PWM signal pulses

     






    » Terms of use
    » Shipping
    » Payments
    » Privacy Notice