Aυτόματος τροφοδότης βιδών υψηλής απόδοσης

Κωδικός προϊόντος: 14-0460

Βάρος: 2.666 Kg


€ 380,00


Οι τιμές δεν περιλαμβάνουν ΦΠΑ (24%)


        Αμεσα Διαθέσιμο - (Ποσότητα: 1)
Show shipping cost estimation
Περιγραφή
Screw head
Suits each tape of screw (Lmax=20mm)
Output speed
2 screw/s
Input voltage
DC 12V/550mA
Product size
180mm x 125mm x 150mm (L x W x H)
Adjustable for a wide range
The track can adjust freely to suit many kinds of types screws, like M1.0 – M5.0 standard screw (1.0 1.2 1.4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0), special screw, 1:1 short screw, filling piece screw and so on.
Running smoothly
The screws movement and roll down inside the bucket, all the screws did not  enter the track will be cleared to enter the next circle, screws will not be  stuck, the check point will not vibrate.
Working speed adjustable
Feeding system and drive system independent control, set the time delay freely  to adjust the feed speed, suits many kinds of works.
Simple operation
Even novices can operate freely, whether metric specifications or british  specifications, all easily to understand.
Can increase productivity significantly
It is unnecessary to target the screw cap, compared to screw plate, each screw  can save 1.4 seconds, productivity increased by 4 times. 
Automatic alarm function
When non-normal condition occurs, the machine can automatic alarm.
 
Operations:
1. Adjusts parameter suitable (The methods will be told next) 
2. Open the lid,pours into groups the bolt for the material room
3. Turn on the power button,put the electric screwdrive head into guide  slot,down along the guide slot,pull out the screw bolt go straight
 
Note:
The product is electrical automation equipment,please strictly abide by the use of norms.
Please read this manual before using the machine,and keep it safely.
In case of any insurmountable problems. Please contact us.