4 Axis 400Khz Stand Alone Controller
Product code: 12-0385
Weight: 0.427 Kg
Measurement: τμχ
VAT is not included (24%)
In stock (15-30 days)
Show shipping cost estimation
Weight: 0.427 Kg
Measurement: τμχ
€ 280,00
VAT is not included (24%)
In stock (15-30 days)
Show shipping cost estimation
Description
It can control 4 feeding axis, 1 analog spindle.
It is equipped with 16 input ports and 8 output ports, supporting importing G code files from USB stick.
Support saving the current coordinates after power off.
| Minimum data unit | 0.001 mm |
| Maximum data size | ± 99999.999 mm |
| Maximum Speed | 24 m/min (pulse is 0.001mm) |
| Maximum pulse output frequency | 400KHz |
| Axis |
1-4 (X,Y,Z,C) X,Y,Z,C axis can conduct linear interpolation X,Y can do circular interpolation. |
| Electric Gear |
Numerator: 1-99999 Denominator: 1-99999 |
| USB | Importing program and boot picture (You can load your own logo) |
| Isolated I/O port | |
| Maximum Program Line | 1000 |
| Maximum Program | 99 |
| RAM | 128M |
| External Manual Operation |
Motor clockwise and counter clockwise spinning, start, pause, alert and stop |
| Codes | G code and M code |
| One panel MPG (Registered Patent) | |
| 3.5 inch color LCD, pixel 320×240 | |
| Analog Spindle Output | One 0–10V analog spindle |
| Motor support | Both servo and stepper motor |
| Metric system support | Round, division, degree, inch etc |
| Use a USB to connect the computer as power supply or 24VDC power | |
Manual
