CNC CAT-Eco (New Version)
Product code: 10-0162
Weight: 65 Kg
Measurement: τμχ
VAT is not included (24%)
Readily available - (Quantity: 1)
Show shipping cost estimation
Weight: 65 Kg
Measurement: τμχ
€ 2.800,00
This product does not support Cash On Delivery
VAT is not included (24%)

Show shipping cost estimation
Description
Please note that since CNC CAT is a manufacturer of CNC machines and automation systems, it is possible to add additional functions and systems and generally make modifications according to your needs. Please contact us to discuss in detail and request a quote.
BEST BUY! CNC router engraving and cutting machine (for semi-professional use).
Construction
Mixed construction, from heavy type industrial aluminum and steel.
Working Area
~550mm x 450mm x 100mm (Length x Width x Height)
Table
T-slot Aluminum Table.
Spindle
Kress Air-Cooled Motor Spindle 1Kw manual controlled from 5000 to 28000 RPM.
Kress Air-Cooled Motor Spindle 1Kw manual controlled from 5000 to 28000 RPM.
Collet Type: Collet for all models Kress Spindle.
Motors and drivers
DC Step Motors and Drives (or Servo Motors and Drives Option).
Transmission System
Ball screw transmission on X, Y & Z axis (low backlash).
Transmission and sliding.
Full supported square rails with linear bearings (heavy stress) .
Speed Movement
≤3000mm/min
Machine Protection
The mechanical parts, which are lubricated, are sufficiently covered and remote from the cutting surface, to prevent the deterioration caused by scraps and dust, which stick on them during the lubrication.
Cutting and Engraving Speed
The speed movement is 3m/min. However, the speed depends on the design, the material and the desirable quality. So, the cutting and engraving speed is a variable and non-calculable rate.
Dust and scrap collection system
Dust and scrap collection system, with passive height adjustment (extendable).
98% suction rate.
Semi automatic tool changing procedure.
Tool length sensor (tool probe), which is an automatic tool measuring system.
Home
Terminals - home, inductive switches on the home side of each axis.
Cable Management
Drag Chain (X & Y axes).
Electronics Cabinet
Metal electronics cabinet.
The cabinet is embedded on the CNC machine, with ventilation system and filters.
Emergency
Emergency stop button on the front of the engine.
Connection
USB
Software
Mach 3(Greek version available, without extra charge).
Upgrade possibilities
Possibility to add coolant system(mist)
Support
3 hours of remote support via TeamViewer
Machine dimensions
~1000mm x 700mm x 650mm
Warranty
2 Years
CE certified

Please note that since CNC CAT is a manufacturer of CNC machines and automation systems, it is possible to add additional functions and systems and generally make modifications according to your needs. Please contact us to discuss in detail and request a quote.
CNC CAT-Eco
Other products
4.000,00 € | 9.000,00 € | 1,00 € |