CNC CAT-Blade 6090 ATC

Product code: 10-0333

Weight: 150.000 Kg

€ 7.480,00

Στο παρόν προϊόν δεν ισχύει η αντικαταβολή.

VAT is not included (24%)

In stock (5-10 days)
Show shipping cost estimation

Description

Floor-standing engraving and milling CNC Router machine (for professional use)

The Blade 6090 is the jewel of the Greek company CNC CAT and is a "little giant" as, despite being small in size and cost, it achieves very high performance.

With servo motor and guides, high stress square rails, zero play ball screws and high speed web controller, it ensures high accuracy, repeatability as well as speed.

After the latest upgrade, the Blade 6090 engine has gained even more capabilities and can accept many additional systems to meet any need!

It is a machine ideal for prototyping but also production and should not be missing from any industry and any professional, while it is no coincidence that it is a best seller in Greece and Cyprus!

Construction

Mixed construction, from heavy type industrial aluminum and steel.

Working Area

970mm x 689mm x 130mm (Length x Width x Height).

Table

T-slot Aluminum Table.

Spindle

Air-Cooled Motor Spindle 1.5KW.

Inverter for the 1.5Kw Spindle Controlling from 1.000 to 24.000 RPM.

Collet Type: ER16

Motors and drivers

Servo Motors and Drives.

Transmission and sliding

Ball screw transmission on X, Y & Z axis (low backlash).

Full supported square rails with linear bearings (heavy stress) .

Speed Movement

?4000mm/min

Cutting and Engraving Speed

The speed movement is ?4m/min. However, the speed depends on the design, the material and the desirable quality. So, the cutting and engraving speed is a variable and non-calculable rate.

Dust and scrap collection system

Dust and scrap collection system, with passive height adjustment (extendable).

98% suction rate.

Semi automatic meassuring system

Tool length sensor (tool probe).

Automatic tool changing (ATC) system

Automatic tool change (ATC) system for the 1.5kw spindle, with 5pcs SK15 tool holders, and a 5-position tool magazine with "tool in"-"tool out" control.

Home

Terminals - home, inductive switches on the home side of each axis.

Cable Management

Drag Chain (X & Y axes).

Machine Protection

The mechanical parts, which are lubricated, are sufficiently covered and remote from the cutting surface, to prevent the deterioration caused by scraps and dust, which stick on them during the lubrication.

Electronics Cabinet

Metal electronics cabinet. The cabinet is embedded on the basis of the CNC machine, with ventilation system and filters. Sealing standard IP64

Emergency

Emergency stop button on the front of the engine.

Extra Choices

• 4th axis

• 4th-5th axis

• Mist System

Software

Mach3 (Greek version available, without extra charge).

Machine dimensions

~1500mm x 1000mm x 1500mm.