BT30 ATC Spindle
Κωδικός προϊόντος: 14-0702
Βάρος: 0.613 Kg
Μονάδα Μέτρησης: τμχ
Οι τιμές δεν περιλαμβάνουν ΦΠΑ (24%)
Άμεσα Διαθέσιμο - (Ποσότητα: 1)
Show shipping cost estimation
Βάρος: 0.613 Kg
Μονάδα Μέτρησης: τμχ
€ 450,00
Οι τιμές δεν περιλαμβάνουν ΦΠΑ (24%)
Άμεσα Διαθέσιμο - (Ποσότητα: 1)
Show shipping cost estimation
Περιγραφή
Description
Maximum Speed: 5000 rpm
This product is an unpowered tool-changing spindle without a motor. The power depends on the motor you configure.
Bearing Configuration: 5 deep groove ball bearings
Cylinder Specifications:
Model: ROANY SDA 80*10
Pulling Force: 300 kgf (broaching force at 0.8 MPa air pressure)
Machining Accuracy:
The shaft is heat-treated for ultra-high hardness and fully ground. The inner taper runout of the spindle is 0.02–0.05 mm (typically 0.02 mm).
Tool Holder:
BT30ER20 tool holder (without ER collet)
Rivet Model: BT30-45°
BT30 unpowered spindle, with cylinder assembly, 1 piece of 5M double-layer integrated variable-speed timing pulley; additionally, 1 piece of 5M double-layer integrated variable-speed timing pulley shall be sent separately for installation on the motor (with an inner diameter of 19mm), along with a belt.
